Shoring Frames
Adjustable Base Jack (Hollow)
Use: The screw jack is used as a starting base for a scaffold. It has an adjustable height of up to 650mm, so that a level scaffold is always attainable. Any scaffold base should always be placed a top mudsill that are on proven solid ground.
Material: Low alloy structural steel
Finish: Electro‐Plated
Product | Drawing No. | Weight (kg) | SWL |
---|---|---|---|
0SHFBJ006 | SF-HAJ-00 | 6.5 | 60 kN |
Adjustable U-Head – Hollow
Use: Adjustable U‐Heads are used for supporting the beams in a concrete slab support, with an adjustable height of 650mm.
Material: Low alloy structural steel
Finish: Electro‐plated
Product | Drawing No. | Weight (kg) | SWL |
---|---|---|---|
0SHFUH004 | SF-HAU-00 | 8.5 | 60 kN |
Shoring Frames
Use: Shoring Frames are connected to each other via cross braces which space the Frames at a set distance. All are hot dip galvanized with a safe working load of 60 kN manufactured and certified to Australian/New Zealand Standards.
Material: Vertical tubes are made from Q345 / SG52 / S355 or Equivalent.
Finish: Hot Dip Galvanized.
Product | Drawing No. | Size (Imperial) | Size (Metric) in mm | Wight (kg) |
---|---|---|---|---|
0SHFFR031 | SF2040-00 | 2′ x 4′ | 685 x 1219 | 11 |
0SHFFR032 | SF3040-00 | 3′ x 4′ | 915 x 1219 | 13.1 |
0SHFFR033 | SF4040-00 | 4′ x 4′ | 1220 x 1219 | 16 |
0SHFFR034 | SF5040-00 | 5′ x 4′ | 1524 x 1219 | 21 |
0SHFFR035 | SF6040-00 | 6′ x 4′ | 1829 x 1219 | 24 |
0SHFFR036 | SF7040-00 | 7′ x 4′ | 2135 x 1219 | 26.8 |
Cross Brace
Use: Cross brace are used to connect two frames to keep vertical as per the specified distance.
Material: Q235 / S235 / Equivalent.
Finish: Pre‐Galvanized.
Product | Drawing No. | Frame Span | Frame Height (Ft) | Brace Length Hole c/c (mm) | Weight (kg) |
---|---|---|---|---|---|
0SHFCB040 | CB4030-00 | 4′ | 2′ | 1363 | 3.6 |
3′ | 1363 | 3.6 | |||
0SHFCB046 | CB4040-00 | 4′ | 1523 | 3.9 | |
0SHFCB046 | CB4050-00 | 5′ | 1723 | 4.5 | |
0SHFCB047 | CB4060-00 | 6′ | 1951 | 5 | |
0SHFCB048 | CB4060-00 | 7′ | 1951 | 5.7 | |
0SHFCB041 | CB5030-00 | 5′ | 2′ | 1641 | 4.3 |
3′ | 1641 | 4.3 | |||
0SHFCB044 | CB5040-00 | 4′ | 1777 | 4.6 | |
0SHFCB047 | CB5050-00 | 5′ | 1951 | 5 | |
0SHFCB049 | CB5060-00 | 6′ | 2155 | 5.5 | |
0SHFCB050 | CB5060-00 | 7′ | 2155 | 6.1 | |
0SHFCB042 | CB6030-00 | 6′ | 2′ | 1928 | 4.9 |
3′ | 1928 | 4.9 | |||
0SHFCB045 | CB6040-00 | 4′ | 2044 | 5.3 | |
0SHFCB048 | CB6050-00 | 5′ | 2198 | 5.7 | |
0SHFCB050 | CB6060-00 | 6′ | 2380 | 6.1 |
Frame Connector
Use: Frame connector are used to connect two frame together on top.
Material: Low alloy structural steel
Finish: Hot Dip Galvanized.
Product | Drawing No. | Weight (kg) |
---|---|---|
0SHFCP004 | SF-FC-00-E | 0.66 |
Frame Extension
Use: To be used as extensions to shoring frame
Material: Q345 / SG52 / Equivalent.
Finish: Hot Dip Galvanized.
Product | Drawing No. | Size (mm) | Weight (kg) |
---|---|---|---|
0SHFSE001 | SF-EXT-30 | 300mm | 3 |
0SHFSE002 | SF-EXT-50 | 500mm | 4 |
Base Plate + Spike (Fixed)
Use: Base Plates can be used in lieu of the Base Jack below the Shoring Frame leg when minimum height is required.
Material: Q235 / S235 / Equivalent.
Finish: Electroplated
Product | Drawing No. | Weight (kg) |
---|---|---|
0SHFBP004 | SF-BP-00 | 1.6 |